The performance characteristics of Coriolis Mass Flow Meter
1. Compared with the traditional flow measurement methods, specific advantages of the Flow Meter has the following several aspects: the quality of the direct measurement of the pipe fluid flow measurement with high accuracy, good repeatability, can be in a larger range than the range, direct measurement of fluid mass flow rate to achieve high accuracy.
2. The accuracy of measurement is high. The mass flow measurement accuracy of the Flow Meter is 0.1%; At the same time, it can accurately measure the temperature and density of the fluid medium.
3. Stable and reliable Flow Meter pipeline without obstacles and moving parts, so high reliability, long life, small maintenance; Easy to use and safe.
4. Adapt to the fluid medium surface width in addition to the general viscosity of uniform fluid, but also can measure high viscosity, non-Newtonian fluid; It can measure not only the fluid parameters of a single solution, but also the multiphase flow with uniform mixing. Whether the medium is laminar flow or turbulent flow, does not affect the accuracy of its measurement.
5. A wide range of applications can be in petrochemical, pharmaceutical, paper, food, energy and other fields of measurement and monitoring.
6. Good corrosion resistance can be used for all kinds of common corrosive fluid media.
7. A variety of real-time online measurement and control functions in addition to the mass flow, but also directly measure the density and temperature of the fluid. Intelligent flow transmitter, can provide a variety of parameters display and control functions, is a set of multi-functional flow measurement and control instrument.
8. Good scalability according to user needs, the company can design and manufacture special specifications and special functions of the mass flow meter; Also can carry on the remote monitoring operation.
9. Another form of two-phase separation metering equipment consists of a two-phase separator, a mass flowmeter and a gas flowmeter. The mass flowmeter measures the amount of fluid separated and calculates the water cut in it to measure the oil, gas and water production of the well. This calculation device has less investment and easy operation, and has been widely used in China's oil fields. It can be seen from this paragraph that there is a difference in the measurement of liquids and gases.