Safety Expert for Oil Storage & Transportation

Home / All / Static Grounding Devices / Static Grounding Monitoring System /

ATEX approved Static Protection Grounding Monitoring Device

ATEX approved Static Protection Grounding Monitoring Device

ATEX approved Static Protection Grounding Monitoring Device
ATEX approved Static Protection Grounding Monitoring DeviceATEX approved Static Protection Grounding Monitoring DeviceATEX approved Static Protection Grounding Monitoring DeviceATEX approved Static Protection Grounding Monitoring DeviceATEX approved Static Protection Grounding Monitoring Device
CategoriesStatic Grounding Monitoring System
BrandALPTEC Static Grounding Solutions Manufacturer
ModelSLA-S-Y
StructureController+ Grounding Cable
Controller MaterialAluminum
Cable Length5m 7m 10m
Cable MaterialCopper
CertificationATEX cert.
Unit PriceUS $ 654-817 / piece
FOB portQingdao port or any port of China
Terms of PaymentL/C, Western Union, T/T, Paypal
Download
Update TimeOct 12,2024
Detail Information
1. Introduction
The "Static Grounding Monitoring System" functions as a part of an Overfill Protection & Earthing System. These provide a visual green light indicating a confirmed grounding condition of road tanker vehicles during the transfer of flammable and combustible materials. A red light indicates the absence of dependable grounding. An interlock circuit inside the control panel will prevent pumps and equipment from starting until a satisfactory ground is established. The interlock circuit will also shut off pumps and equipment if the ground is lost during the pumping operation.

2. Advantages

1. Static Protection Ground Monitoring Device is ATEX approved.

2. Module integrated design, easy to install and maintain.

3. Flameproof enclosure: Incorporating Intrinsically Safe Static Grounding Monitoring System. Vehicle static earthing system can be used outdoors for controller’s degree of protection is IP65.

Advantage:

1. ATEX approved.

2. Easy to install.

3. Price moderate.

3. Specifications

Input Power: 85 VAC to 250 VAC 50 Hz
Input Current: <60m A 
Output Signal: On-Off signal 
Monitoring Set Point: 10 ohms 
Alarm: Visible alarm 
Spiral Cable: Extendable to 5.3 m (17.4 ft.)
Output Safety Parameters:
Um:250 VAC, Uo: 14.28 VDC, Io: 27.2 mA, Po:97 mW,Co:4.17μF, Lo:192mH
Indicator: Lamp (Green=satisfactory ground and red=no ground)
Ambient Temperature: -20℃ to +55℃(-4℉ to +131℉)
EU-Type Examination Certification No.: Presafe 16 ATEX 8909X
QAN Certificate No.: Presafe 16 ATEX 7744Q
Standard: EN60079-0, EN60079-1, EN60079-11
Applicable Directive:2014/34/EU
4. Installation Diagram &  Dimensions
5. Package


Packaging: cartons(one pc in one carton)

Dimensions:45*35*16 cm

Gross Weight: 6.8 kgs

Delivery time: 2 days after payment

Delivery: by sea or courier such as FedEx, DHL, TNT, UPS




6. System Elements
6. Company Information
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.