ATEX approved Static grounding system for tank trucksDetail Information1. IntroductionThe "Static Grounding Monitoring System" functions as a part of an Overfill Protection & Earthing System. These provide a visual green light indicating a confirmed grounding condition of road tanker vehicles during the transfer of flammable and combustible materials. A red light indicates the absence of dependable grounding. An interlock circuit inside the control panel will prevent pumps and equipment from starting until a satisfactory ground is established. The interlock circuit will also shut off pumps and equipment if the ground is lost during the pumping operation.
1. ATEX approved Static grounding system for tank trucks is ATEX approved.
2. Module integrated design, easy to install and maintain.
3. Flameproof enclosure: Incorporating Intrinsically Safe Static Grounding Monitoring System. Vehicle static earthing system can be used outdoors for controller’s degree of protection is IP65.3. SpecificationsInput Power: 85 VAC to 250 VAC 50 HzInput Current: ＜60m AOutput Signal: On-Off signalMonitoring Set Point: 10 ohmsAlarm: Visible alarmSpiral Cable: Extendable to 5.3 m (17.4 ft.)Output Safety Parameters:Um:250 VAC, Uo: 14.28 VDC, Io: 27.2 mA, Po:97 mW,Co:4.17μF, Lo:192mHIndicator: Lamp (Green=satisfactory ground and red=no ground)Ambient Temperature: -20℃ to +55℃(-4℉ to +131℉)EU-Type Examination Certification No.: Presafe 16 ATEX 8909XQAN Certificate No.: Presafe 16 ATEX 7744QStandard: EN60079-0, EN60079-1, EN60079-11Applicable Directive:2014/34/EU4. Installation Diagram & Dimensions5. PackagePackaging: cartons(one pc in one carton)Dimensions:45*35*16 cmGross Weight: 6.8 kgsDelivery time: 2 days after paymentDelivery: by sea or courier such as FedEx, DHL, TNT, UPS6. System Elements6. Company InformationRelated Products